Dinosaur Drawer Advent Calender Assembly Instructions
Here we have a step by step photo guide on how to put our advent together
You will need to use wood glue to secure the product together
Pieces you will receive
For the first step you will need the following pieces layed out in front of you.
Each bar slots into one of the 5 middle spaces seen on the backboard, use the image below to help with placement.
Next you will need the four longest bars pictured below.
These bars will slot together with the ones already placed on the back board, to make a criss cross pattern.
Take the 2 bars seen in the image above on the left and place these down the slots in the centre.
Push down to make sure these touch the back piece
Now take the 2 bars seen in the image above on the right and place these on the next slots either side of the ones you have just placed
The image below will demonstrate what it should now look like.
There should be 5 pieces left which includes the front, you will just need the 4 remaining bars pictured below.
Each of these bars acts as an end to the rows, place each bar in their slot and gently lift the inside bars placed in earlier so that the end of them slot into the end bar.
It is these end bars we recommend using glue on once placed as these will support the whole rows structure.
The image below should help with how it should look now.
The final piece is the front and this just slots on top using the notches sticking up from the end bars as a guide.
The image above is what the final product should look like.
Next the drawers
You will need the following pieces for each drawer plus wood glue to fix them together
In each corner join you will have a small rectangle and a large square.
Apply wood glue to all the lower teethed areas on all the sides of each piece
Once done bring all the pieces together to form a box
We also have an instruction video