Laser Engraved Wording
Here we have put together a helpful blog to show how easy it is and what you need to do our laser engraved wording items
What you need
Step one
Paint the wording using a small brush in your chosen colour
Step two
Don't worry if you go out of the lines as we will be sanding this off next. Try to get as little outside though as this will save you some work on the next step!
Step three
Another option to use is posca paint pens to fill in the laser engraved wording or shapes
Step four
Step five
Wording and shapes all coloured in
Step six
Next you can sand of the excess paint which has gone out of the lines
Use a medium to high grade sandpaper for this
Step seven
Throughly sand to remove all the paint on the surface of the item
Step eight
Step nine
Get a couple of soft dry brushes to dust away the saw dust from the laser engraved wordingin and shapes
Step ten
Step eleven
Wordng completed
Step twelve
Next you can paint the rest of the item. We are going to use a foam pad brush for the top over the wording and then normal brushes for the sides
Step thriteen
Step fourteen
Apply 2-3 coats of paint to the front
Apply 2-3 coats of paint to the sides and back
**Please see our other blog to get the best finish to our router products**
Completed item
More of our laser engraved items painted and decorated
